Fitting List | Products | EXEDY RACING CLUTCH

	MODEL BUILD DATE	Product specification
	MODEL BUILD DATE	ACTUATION	SIZE	CLAMP LOAD (N)	ATTACHMENT	ADDITIONAL PARTS REQUIRED	REMARK
Single	TH01SD	PS	φ200	9800	-	(3)	-

* Click each item to see the details of the parts that must be separately purchased.

1 Both application R32 late model and R33 with conversion kit can be installed.
2 NISMO Strengthened shaft, HOKINGER T/M,HKS T/M, can be applicable.
3 This value is measured under the condition that the frictional face is around 70 degrees.
4 PS : Push Type,PL:Pull Type.
5 The items with <EXEDY Number> are due to be discontinued.

DISC TYPE	CLUTCH SET (disc and cover)	CLUTCH DISC	CLUTCH COVER		FLYWHEEL
DISC TYPE	PART No.	PART No.	CLAMP LOAD (N)	PART No.	WEIGHT(kg)	PART No.
ULTRA FIBER DISC	TK02H	TD03H	6900	TC03T	4.8	TF01
S-TYPE	TK02T	TD03T	6900	TC03T	4.8	TF01

Note:Facing Material [ULTRA FIBER DISC] is standard type. [S TYPE] is thick metal type for sport use. [R TYPE] is thin metal type for Racing use. [P TYPE] is ultra thin metal type for professional use.
Note:It is hightly recommended that [R TYPE] and [P TYPE] in column [FACING MATERIAL] must be used with mating cover assembly.
Note:Do not use EXEDY clutch in combination with third-party products or Genuine parts.
Note:In the Part No.column,alternative part numbers appear in parenthesis.

★1 Must be used with EXEDY solid flywheel(NF05),don't use with a genuine dual-mass flywheel.
★2 Must be used with EXEDY flywheel(LF01),don't use with a genuine flywheel.
▲5 Do not use EXEDY clutch in combination with genuine clutch cover and clutch disc. A combination of SD02T/H and SC10T must be used.
▲6 Do not use EXEDY clutch in combination with genuine clutch cover and clutch disc. JK01H or a combination of JD01H and JC01T must be used.

Fitting Search Fitting Search